King County, TX
These figures come from wells tested in King County, TX, not from any one well.
- Sulfate is common in wells in King County, TX (11 of 11 tested wells were over that level), so it's worth testing for.
- Wells in King County, TX are typically very hard (11 wells tested).
- Only a test of your own well tells you about your water.
What to test for
Start with the four this site covers:
- sulfate (common in wells here)
- iron
- manganese
- hardness
Most well owners also test for these. We point to the source and don't interpret the results.
- arsenic: occurs naturally in groundwater in many regions. USGS: arsenic and drinking water
- nitrate: common near farmland and septic systems. EPA: private drinking water wells
- total coliform bacteria: the standard yearly well check. EPA: private drinking water wells
- lead and copper: from household plumbing, especially when pH is below 6.5. EPA: lead in drinking water
- PFAS: several states run private-well sampling programs. EPA: PFAS
- a certified lab: states certify labs and some run their own private-well programs. Texas's certified-lab list (from your state drinking-water program)
The numbers
County figures describe the wells sampled there, not any one well. Exact counts, sample years and sources are below.
Hardness Older tests
| Level it's compared with | none; hardness is shown in bands |
|---|---|
| Share of wells very hard | 100% |
| Median | 1800 mg/L as CaCO₃ |
| Years sampled | 1978–1979 |
| Wells | 11 |
| Test results | 21 |
| Wells left out | 3 |
| Sources | USGS (11) |
Sulfate Older tests
| Level it's compared with | 250 mg/L |
|---|---|
| Share of wells over the level | 100% |
| Wells over the level / wells judged | 11 of 11 |
| Median | 1950 mg/L |
| Years sampled | 1978–1980 |
| Wells | 11 |
| Test results | 42 |
| Wells left out | 3 |
| Sources | USGS (11) |